Главная страница

КР англ. Thermal Power Plants also called Thermal Power Generation Plant or Thermal


Скачать 16.14 Kb.
НазваниеThermal Power Plants also called Thermal Power Generation Plant or Thermal
Дата16.01.2023
Размер16.14 Kb.
Формат файлаdocx
Имя файлаКР англ.docx
ТипДокументы
#888895



Thermal Power Plants also called Thermal Power Generation Plant or Thermal

Power Station. In thermal power plants, the heat energy obtained from

combustion of solid fuel (mostly coal) is used to convert water into steam, this

steam is at high pressure and temperature.

Thermal Power Plant consists of a whole set of steps in series for producing

electricity. The fuel is transported from mines via trains to the fuel storage

facility in a power plant. The fuel transported to the plant is generally bigger in

particle size and before it is fed to the boiler furnace it is broken down into

smaller pieces using crushers. The fuel is then fed to the boiler generating a

large amount of combustion heat.

On the other hand treated water free from impurities and air is fed to the boiler

drum where the combustion heat from the fuel is transferred to water to convert

it into high pressure and temperature steam.

Generally, flue gases from the boiler exhaust are at high temperature and if this

heat is not utilized will lead to a large number of losses resulting in reduced

boiler efficiencies.

So generally this waste heat is recovered by heating either air required for

combustion or preheat water before sending it into a boiler.

Flue gases are then allowed to pass through a dust collector or a bag filter to

arrest dust particles so as to prevent air pollution before sending it to the

atmosphere through a chimney.

Тепловые электростанции, также называемые Теплоэнергетическими или Теплоэлектроцентралью. На тепловых электростанциях энергию получают от сжигания твердого топлива (в основном угля) это используется для преобразования воды в пар, этот пар находится под высоким давлением и температурой. Тепловая электростанция состоит из целого набора последовательных шагов для производства электричества. Топливо доставляется на склад электростанции поездом из шахт. Топливо, транспортируемое на завод, как правило, состоит из больших кусков, и перед подачей в топку котла разбивается на более мелкие части с помощью дробилок. Затем топливо подается в котел, вырабатывающий большое количество теплоты сгорания.

С другой стороны, в котел подается очищенная от примесей вода, и подается воздух в барабан котла, в котором температура сгорания топлива нагревает воду для преобразования в пар высокого давления и температуры.

Как правило газы, выделяющиеся из котлов, имеют высокую температуру и если это тепло не используется, то это приводит к большому количеству потерь и в результате к снижению коэффициента полезного действия (КПД) котла.

Таким образом, обычно это отработанное тепло утилизируется при нагревании воздуха, необходимого для горения или предварительного нагрева воды перед отправкой в ​​котел.

Затем газы пропускают через пылесборник или рукавный фильтр, чтобы задерживать частицы пыли во избежание загрязнения воздуха, прежде чем отправить его в атмосферу через дымоход.

  1. The design of thermal power stations depends on the intended energy source: fossil fuel, nuclear and geothermal power, solar energy, biofuels, and waste incineration are all used. Certain thermal power stations are also designed, to produce heat for industrial purposes; for district heating; or desalination of water, in addition to generating electrical power. Fuels such as natural gas or oil can also be burnt directly in gas turbines (internal combustion). These plants can be of the open cycle or the more efficient combined cycle type.

  2. Environmental experts consider thermal power plants to be ecologically impure.

Coal, oil, the earth underground heat, solar energy are used as a fuel at

thermal power plants.

Thermal power plants generate about 80% of total electric energy production.

  1. heat power, thermal power (тепловая энергия, температура сгорания)

engineering processes (технологические процессы)

raw materials (сырье)

in the free or graphite state (в cвободном или в состоянии графита)

in the combined state (в совокупности, смешанном состоянии)

power generation (производство, выработка электроэнергии)

suspended particulate matter (пыльные массы)

dissolved oxygen (растворенный кислород)


написать администратору сайта