Учебное пособие предназначено для бакалавров всех специальностей и направлений подготовки радиотехнического факультета. В нем представлены материалы для аудиторной и самостоятельной работы
 Скачать 1.03 Mb.
|
APPENDICESCircuit symbols     Model of an abstract Rick Cushing, «Single-Sideband Upconversion of Quadrature DDS Signals to the 800-to-2500-MHz Band» Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998. The paper under discussion covers the area of radio engineering and deals with a problem of low frequency signals and their quadrature modulation. Its key idea is to introduce the basic unconvert principles for quadrature low-frequency signals carried by means of direct digital synthesis. The engineering approach to the problem is based on upconversion methodology to suggest innovative solutions for low-frequency signals by means of integrated circuits. Besides, a problem of transformation without loss of quality is thoroughly considered. The results of laboratory studies on direct digital synthesis are analyzed in detail. Particular attention is given to the main parameters of signals with view to their transformation characteristics. The data obtained are backed up by the figures given to illustrate the main transformation processes and their properties. The material presented can open new prospects for further research studies. It seems to be interesting to those who work in the field of digital radio engineering. Key words: digital radio engineering, low frequency signals, quadrature modulation, upconversion methodology, direct digital synthesis. Commentaries: В первом предложении дана информация о предметной области и объекте исследования (thesubjectareaandtheresearchobject): The paper under discussion covers the area of radio engineering and deals with a problem of low frequency signals and their quadrature modulation. Второе предложение содержит информацию о цели и предмете исследования (the aim and the subject of the investigation): Its key idea is to introduce the basic unconvert principles for quadrature low-frequency signals carried by means of direct digital synthesis. Содержание третьего предложения – методология/ реализуемый подход к решению проблемы (Methodology): The engineering approach to the problem is based on upconversion methodology to suggest innovative solutions for low-frequency signals by means of integrated circuits. Четвертое – шестое предложения в тексте аннотации раскрывают детали содержания: Besides, a problem of transformation without loss of quality is thoroughly considered. The results of laboratory studies on direct digital synthesis are analyzed in detail. Particular attention is given to the main parameters of signals with view to their transformation characteristics. Седьмое – девятое предложения иллюстрируют итоги работы и содержат заключение о значении данного исследования в широком контексте данной области знания: The data obtained are backed up by the figures given to illustrate the main transformation processes and their properties. The material presented can open new prospects for further research studies. It seems to be interesting to those who work in the field of digital radio engineering. Additional texts THE HISTORY OF RADIO Without understanding the inquiries of pure science, we cannot follow the story of radio. It begins perhaps with Joseph Henry, an American physicist, who discovered in 1842 that electrical discharges were oscillating. A gigantic step forward was taken by James Maxwell, a Scottish physicist and one of the great mathematical geniuses of the 19-th century. By purely mathematical reasoning, Maxwell showed that all electrical and magnetic phenomena could be reduced to stresses and motions in a medium, which he called the ether. Today we know that this "electrical medium" does not exist in reality. Yet the concept of an ether helped greatly, and allowed Maxwell to put forward his theory that the velocity of electric waves in air should be equal to that of the velocity of light waves, both being the same kind of waves, merely differing in wave length. In 1878, David Hughes; an American physicist, made another important discovery in the pre-history of radio and its essential components. He-found that a loose contact in a circuit containing a battery and telephone receiver (invented by Bell in 1876) would give rise to sounds in the receiver which corresponded to those that had impinged upon the diaphragm of the mouthpiece. In 1883, George Fitzgerald, an Irish physicist, suggested a method by which electromagnetic waves might be produced by the discharge of a condenser. Next we must turn to Heinrich Hertz, the famous German physicist, who was the first to create, detect and measure electromagnetic waves, and thereby experimentally confirmed Maxwell's theory of "ether" waves. In his experiments he showed that these waves were capable of reflection, refraction, polarization, diffraction and interference. A.S.Popov (1859-1906) was in 1895 a lecturer in physics. He set up a receiver in 1895, and read a paper about it at the Meeting of the Russian Physico-Chemical Society on April 25 (May 7, New Style) 1895. He demonstrated the world's first radio receiver, which he called "an apparatus for the detection and registration of electric oscillations". By means of this equipment, Popov could register electrical disturbances, including atmospheric ones. In March 1896 he gave a further demonstration before the same society. At that meeting the words "Heinrich Hertz" were transmitted by wireless telegraphy in Morse code and similarly received before a distinguished scientific audience, Popov has become the inventor of the radio, May, 7 being celebrated each year as "Radio Day" in the Soviet Union. Marconi invented a system of highly successful wireless telegraphy, and inspired and supervised its application. Such is .the story of the many inventors of wireless telegraphy, working with each other's equipment, adding new ideas and new improvements to them. It was a patient, persistent inquiry into natural laws and it was animated by the love of knowledge. During the first years of its development, radio communication was called "wireless telegraphy and telephone". This name was too long for convenience and was later changed to "radio" which comes from the well-known Latin word "radius" — a straight line drawn from the centre of a circle to a point on its circumference. Wireless transmission was named radio transmission, or simply "radio". The term "radio" now means the radiation of waves by transmitting stations, their propagation through space, and reception by receiving stations. The radio technique has become closely associated with many other branches of science and engineering and it is now difficult to limit the word "radio" to any simple definition. Notes without understanding the inquiries of pure science — не зная истоков чистой науки by purely mathematical reasoning — при помощи чисто математических рассуждений 3. does not exist in reality — на самом деле не существует 4. both being the same kind of waves – причем обе являются волнами одного типа 5. distinguished audience — авторитетная аудитория SEVEN RAYS, ONE FAMILY "Isn't it a small world" You have probably heard this exclamation many times. People often say it when they find that acquaintances they had met at different times and places, and whom they never connected with each other, turn out to be related to each other. Scientists often have a similar experience with occurrences in nature. (Things or events that at first seem to have nothing to do with each other turn out to be related after all. We shall repeat this experience with seven kinds of rays. We find them in different places, and use them in different ways, but they are close relatives. They are members of one family, the family of electromagnetic waves. The kind of ray that mankind has known for the longest time is light. It helps us see the objects that surround us, when the objects reflect the light into our eyes. Because our eyes can detect light, we call it a visible ray. The other rays are invisible. We find three types of invisible rays in use in our homes. When we listen to a radio programme, we are using the rays that are called radio waves. When we cook a meal on an electric cooker, we are using infrared rays, sometimes referred to as heat rays. When we sit under a sun-tan lamp, we are using ultraviolet rays. We meet the other three types of rays outside the home. Inside the hospital we shall find X-rays, produced by X-rays machines, and used for taking pictures of the insides of our bodies. At airports everywhere we shall find microwaves used with radar equipment to detect planes in the air, or guide them in to land. Also in hospitals we find gamma rays used as invisible bullets to kill cancer cells. These seven types of rays resemble each other in that they are all electromagnetic waves. What makes them different from each other is their frequency or their wavelength. The distance that the wave moves during the time it takes for one complete cycle of vibration is called the wavelength of the wave. The frequency is the number of cycles in a second. Notice that radio waves are the longest of the electromagnetic waves and have the lowest frequency. Notes Isn't it a small world — Мир тесен 2. occurences in nature — явления в природе 3. things or events that at first seem to have nothing to do with ... — предметы или события, которые, как кажется на первый взгляд, ничего не имеют общего ... RADIO WAVES During the last t few decades, a subtle change has occurred which none of our senses can register. Radio waves, bearing messages in many tongues, flow ceaselessly around us, through us and above us. We can only hear and see them if we convert them to other waves to which our ears and eyes are receptive. Radio waves are the longest members of the family of electromagnetic waves. In the spectrum, in which the waves are arranged in order of increasing wavelength, they lie beyond the infrared waves. Their wavelengths range from about three hundredths of a centimetre to about 300 kilometres. Radio broadcasts today are made by two different methods known as AM (amplitude modulation) and FM (frequency modulation). The frequencies of the waves used) are expressed in kilocycles or megacycles. The vibrating current is fed into an antenna from which the radio waves are broadcast into space. Microwaves are the smallest radio waves. In the spectrum of electromagnetic waves they lie between infrared rays and the long radio waves. The shortest microwaves have a wavelength of about three hundredths of a centimetre and a frequency of one million megacycles. The longest microwaves have a wavelength of about three metres and a frequency of one hundred megacycles. The first microwaves made by man were the two-foot waves produced by Heinrich Hertz. It is interesting that they were the last to be put to a practical use. Long waves were easier, to produce and send out over long distances. Scientists had to return to the use of short waves in order to solve a problem that came up during World War II. The problem was "How can you detect an approaching enemy plane while it is still far away?" A possible answer to the problem was to send a beam of radio waves. Long radio waves could not be used for this purpose because they fan out too quickly from the broadcasting antenna. Very short waves were necessary to make the radar system work. So new transmitters and receivers were designed to make and use microwaves. Notes . none of our senses — ни одно из наших чувств . bearing messages in many tongues — несущие сообщения на многих языках . in order of increasing wavelength – в порядке увеличения длины волны . in order to solve a problem — чтобы решить проблему THE RECORD-PLAYER. HOW DOES IT WORK? You may know a lot about music: you may have a good knowledge of modern records: but how much do you know about the machine that plays your records? How, for example, does it work? It will help you to understand how record-players) work, if you go back to the person who invented the first phonograph, Thomas Edison. He had been experimenting on ways of sending Morse Code signal more quickly by telegraph| in order to do this, he built a machine (which cut out small marks, representing the Morse symbols into a strip of paper. By running the paper through the transmitting machine at a very fast speed, he could send messages much more quickly than by the manual method. He noticed that the machine was making a noise which sounded like human voices3 in conversation! Edison was a true scientist: if something unusual happened he wanted to find out why: so he decided to fit a diaphragm to the machine, to see what this would do. After a few experiments, Edison devised a machine which consisted of two diaphragms on either side of a drum of tinfoil. Each diaphragm was attached to a needle, which rested on the foil. Edison turned the drum by hand and shouted a poem into one of the diaphragms — the recording unit — which then cut a pattern into the tinfoil. This is because the diaphragm vibrations moved the needle in certain directions, which were recorded on the foil. Edison then reversed the process so that the reproducing needle was at the start of the newly-cut needle path5 and started winding the drum again. He then heard his own voice repeating the poem: the needle, following the path in the foil, vibrated its diaphragm which then reproduced the sounds that the other diaphragm had recorded. This all happened in 1877 more or less by accident. In a hundred years of development and experimentation, the phonograph has developed into what we know now as the record-player. The principle is still the same; however, sound waves hitting a microphone (diaphragm) are then converted onto a record by mechanical or electronic means. The sound is then stored, it is released as vibration when the needle follows the path that has been cut, and reproduces the original message. Stereo sound is a little more complicated. Two microphones, each attached to its own recording systems, record the sound that is produced from the loudspeakers. It appears very similar to the original sound. Nowadays, by "mixing" the sound, and by changing it from one channel to the other, you can make the sound travel from one loudspeaker to the next one. Notes 1. Morse Code - алфавит Морзе 2. by running the paper — посредством пропускания бумаги 3. Like human voices — подобно человеческим голосам 4. on either side — с обеих сторон 5. the newly-cut needle path — только что прорезанная дорожка. THE SOCIAL HISTORY OF TELEVISION AS A TECHNOLOGY It is often said that television has altered our world. The invention of television was no single event or series of events. It depended on a complex of inventions and developments in electricity, telegraphy, photography and motion pictures, and radio. It can be said to have separated out as a specific technological objective in the period 1875-1890, and then, after a lag, to have developed as a specific technological enterprise from 1920 through to the first public television systems of the 1930s. Yet in each of these stages it depended on inventions made with other ends in view. Television, as an idea, was involved with many of these inventions. It is difficult to separate it, in its earliest stages, from phototelegraphy. The means of transmitting still pictures and moving pictures were actively sought and to a considerable extent discovered. The list is long even when selective; Carey's electric eye in 1875, Nipkow's scanning system in 1884; Braun's cathode-ray tube in 1897; Rosing's cathode-ray receiver in 1907. Through this whole period two facts are evident: that a system of television was foreseen, and its means were being actively sought, but also that, by comparison with electrical generation and electrical telegraphy and telephony, there was very little social investment to bring the scattered work together. In 1923 Zworykin introduced the electronic television camera tube. Through the early 1920s Baird and Lenkins, separately and competitively, were working on systems using mechanical scanning. There was great rivalry between systems and there is still great controversy about contributions and priorities. What is interesting throughout is that in a number of complex and related fields, these systems of mobility and transfer in production and communication were at once incentives and responses within a phase of general social transformation6 The decisive transformation of industrial production and its new social forms created new needs but also new possibilities, and the communications systems, down to television, were their outcome. Notes 1. motion pictures — кино 2. with other ends in view — с другими целями 3. the list is long even when selective — список длинный, даже если он сделан выборочно 4. its means were being actively sought — шли активные поиски средств 5. to bring the scattered work together — соединить разрозненные работы вместе 6. there is still controversy about contributions and priorities — все еще идет полемика по поводу степени участия и приоритета TELEVISION. HOW DOES IT WORK? The principles of television aren't as complicated — or as modern — as you might think, TV technology has become more sophisticated than ever, but the basic method of sending a television picture is quite simple. The first live transmission was made by John Logie Baird, the TV pioneer, in 1924. Television had come a long way since 1884, when Paul Nipkow of Germany patented a mechanical picture scanner. This system formed the basis for Baird's historic- transmissions. Nipkow's invention depended on a rotating disc. Light passing through the holes on the disc was transformed into electric values by photosensitive cells. The path of each hole in the disc was different, and thus traced out a different line, and read the entire frame in a logical order. At the receiving end, a lamp was used to send out corresponding impulses of light, which then passed through a further rotating disc, identical to the one at the transmitting end, and synchronized with it. The light passing through the disc was projected onto a screen to recreate the original object. These attempts at televising objects were very crude, because the scanning speed was slow. A comparable system is used today except that electronic scanning equipment is much faster. Approximately 25 frames per second are scanned. Frame frequency is important in allowing television and films to create moving pictures. The eye retains an image for about 1/16-th of a second, so the mind experiences this succession of pictures as an uninterrupted flow. The large number of lines on modern television makes clearly defined pictures possible. The cathode-ray tube patented in 1897 is used, in its refined form, in present-day television sets. Its importance lies in its capacity to produce pictures. The tube has a screen which glows when struck by a stream of electrons from an electron gun inside the tube. Each point of the screen emits more or less light according to how long the beam is aimed at it. A colour television has three electron guns – one for each of the primary colours, red, blue and green. They bombard a screen of phosphor-dots, arranged in groups of three — one dot for each colour — while a masking device sorts the beams so each one falls on its allocated dot. A colour television camera also has three cathode tubes and electron guns. Notes to recreate the original object - для воссоздания исходного объекта the mind experiences — мозг воспринимает in its refined form — в усовершенствованном виде how long the beam is aimed at it — как долго луч направлен на нее THE AGE OF ELECTRONICS The discovery of the electron, and the investigations into its nature which followed, led to a revolution in physical science. The revolution in pure; science rapidly bore fruit in many fields of applied science and technology, especially in the applied science of electronics. The vacuum techniques developed for the study of free electrons and cathode rays led directly to, the radio valve and the television receiver. The new electronics combined with the older techniques telephone produced a revolution in communications on a world scale. If the discovery of the electron had led only to radio and television it would still represent a decisive factor in the shaping of our civilization — but it led to much more. Electronics produced radar. It led to nucleonics and hence to the exploitation of the immense store of energy locked in the atom. It gave birth2 to the electronic computer. By the middle of the twentieth century a rapidly expanding, world-wide electronics industry was pouring out millions of parts for radio and television receivers and instruments for every branch of science and technology – instruments capable of unprecedented speed and sensitivity3. Electronic devices give immense extension to our senses. We can now examine structures too small to be visible in even the most powerful optical microscope and receive signals from radio stars which started their long journey through space ages before there was any life on our planet. Electronics combined with rocketry has enabled scientists to take close-up pictures of the moon. Electronics applied to medicine has already produced significant advances in diagnosis and treatment. Electronics plays the leading role in automation which is generating a second industrial revolution of wider social significance than the first. Electronics has also given birth to cybernetics which offers, for the first time in history, an effective science of government based on adequate information and communication. It seems very probable that electronics will dominate technology even in the distant future. Notes to bear fruit — приносить плоды, давать результаты to give birth — родить, породить 3. unprecedented speed and sensitivity — небывалая скорость и чувствительность 4. to take close-up pictures — делать снимки с близкого расстояния ELECTRONICS Electronics is the science or practice of using electricity in devices similar to transistors and radio tubes so as to get results not possible with ordinary electrical equipment. Most persons know how electric current flows in motors and transformers; here the electricity always flows in the copper wire or other metal parts. When electricity passes through space as occurs within a tube, such action is called electronic. More recently, when layers of semiconductor metals are joined together so that current flows through the junction in one direction only, as in a solid-state diode or a transistor, such action is also called electronic!; If a device passes its stream of electrons through internal space, or through the junction where certain different metals meet, the device is called electronic. Without electronics there might be no radio, television, sound pictures or long-distance telephone calls. Most of these familiar equipments serve to carry or give information; so communication early was a main purpose of electronics and still holds interest of many workers and students in this field. Meanwhile industry seeking faster and more accurate methods of production has adapted electronic equipment to its own needs. Gradually during the past fifty years industrial plants have installed electronic equipment to give better operation of motors along with control of varied operations. Some people believe that electronic devices can hear, see, feel, smell or even think; this is true only when the sound, image, feeling or thought can be changed into electrical signal, to which the transistor or tube-operated device1 can then respond. Much of the success of electronics depends on the methods used to obtain an electric signal that can be used to stimulate the electronic device into action. The electronic circuit can be made to detect such a signal, increase its strength and put it to useful work. Notes 1. tube-operated device - прибор, управляемый электронной лампой 2. to stimulate into action — побуждать'к действию 3. to put to useful work — заставить выполнять полезную работу VACUUM TUBES The science of electronics now deals almost exclusively with transistors and other solid-state devices. However, vacuum tubes were the principal building blocks1 of electronic circuits until approximately 1955. Briefly, a vacuum tube consists of several metal electrodes of various, shapes all packaged inside a glass or metal envelope which is highly evacuated. Vacuum tubes are often called thermionic "valves". A red hot metallic electrode, (the filament or cathode) emits electrons which are attracted to a positively charged electrode called the plate or anode. The electrons pass through the spaces in a metallic grid elect rode on their way to the plate, and the voltage on the grid controls how many electrons reach the plate. A simple thermionic valve is called a diode because it has two electrodes. A triode is a valve with three electrodes, an anode, a cathode and a control grid. A triode has four, and a pentode — five electrodes. Vacuum tubes are still widely used in oscilloscopes, television sets, high power high frequency radio-transmitters, and in some special low noise amplifiers. However, every year sees a larger number of applications being transistorized. It is probably safe to say that this trend will continue in the future, as there is presently a great deal of technological development being put into solid state electronics and rather little put into vacuum tube electronics. As a general rule, vacuum tubes are inferior to modern solid state devices in many ways. Vacuum tubes are much larger. They require considerably more electric power to operate. However, they can handle high voltages and high powers at high frequencies somewhat more easily than solid state devices. They are also capable of withstanding temporary overloads in voltage or current which would permanently destroy a solid state device and then returning to normal operation. Notes 1. principal building blocks — основные стандартные блоки 2. packaged inside an envelope — заключенный в баллон inferior to modern solid state devices — уступают современным твердотельным приборам to handle high voltages and high powers — оперировать высоким напряжением и высокой мощностью to withstand temporary overloads — выдерживать временные перегрузки would permanently destroy — неизменно разрушает. TRANSISTORS AND SEMICONDUCTOR DEVICES Devices consisting of solid pieces of crystalline material which allowed alternating current to flow more readily in one direction than the other were known long before the invention of the thermionic valve. The crystal set which became so well known in the early days of radio depended on the rectifying action at the point of contact between the surface of certain crystals and a fine wire. Crystal valves, using silicon crystals, were found to be more efficient for the very high frequency signals reaching radar receivers than any thermionic valves. The action of these devices was not understood, but they were all made from materials which we now classify as semiconductors: substances which let electric current pass through them more easily than insulators do but much less easily than do true conductors. In 1948 Bardeen and Brattain invented the point-contact transistor and Shockley invented the junction transistor shortly after. The transistor is a semiconductor triode possessing characteristics which are similar in many respects to those of thermionic triodes. Transistors are widely used in amplifiers, receivers, transmitters, oscillators, TV sets, measuring instruments, pulse circuits, computers, and many other types of radio equipment. The invention of transistors and solid-state devices led to an acceleration in the growth of electronics. Why were these new devices so important and why are they steadily replacing their older equivalents? A brief review of their advantages compared with thermionic devices will provide the answers to these questions. Transistors are made from parts which do not wear out. Transistors waste very little power. They require no heating to generate their free electrons. This means that equipment made with transistors is more efficient, lighter than comparable valve equipment. Since no heating is required there is no delay in transistor equipment waiting for things to warm up, as there is with thermionic valves. This is a great advantage with 'entertainment' equipment, such as radio and television receivers, and it may be vital with some kinds of measuring or recording equipment. Their very small size and weight, combined with low heat dissipation, permits very high density packing of components and, in combination with their reliability, this has made possible the design of the very compact circuits| which are essential for such applications as computers, portable measuring instruments, satellite instrumentation, etc. Notes crystal set — детекторный приемник 2. crystal valve — кристаллический прибор 3. heat dissipation — рассеивание тепла. INTEGRATED CIRCUITS An integrated circuit (IС) is a collection of interconnected transistors, diodes, resistors, and capacitors mounted in one package or case with as many as fourteen leads. The word "integrated" does not refer to the mathematical process of adding together an infinite number of infinitesimally small terms, but rather to the fact that all transistors, diodes, and resistors are formed from a single piece of semiconductor material called a "chip" or a “die”.* If only one chip is present in the case, the IС is called "monolithic"; if several chips are mounted inside the case the IС is called "hybrid". Some integrated circuits contain several thousand transistors and resistors, and so extreme miniaturization is possible. Because of their extremely small size, integrated circuits tend to be restricted to low power applications. Their small size, however, does enable them to operate at high frequencies. The cost of an IC is considerably less than the total cost of the separate components. Monolithic ICs are by far the most common, but there are other kinds. Thin-film and thick-film ICs are larger than monolithic ICs but smaller than discrete circuits. With a thin- or thick-film IС, the .passive components like resistors and capacitors are integrated simultaneously on a substrate. Then, discrete active components like transistors and diodes are connected to form a complete circuit. Therefore, commercially available thin- and thick-film circuits are combinations of integrated and discrete components. If only a few components have been integrated to form the complete circuit it is an example of small-scale integration (SSI). As a guide SSI refers to ICs with less than 12 integrated components. Medium-scale integration (MSI) refers to ICs that have from 12 to 100 integrated components per chip. Large-scale integration (LSI) refers to more than a hundred components. The IС is becoming more important as a component to be used in the design of electronic equipment, not only in equipment that must be small and light in weight, but where reliability and performance are demanded. In many areas of application particularly in digital computers, the IС provides more economical designs. A number of important new developments are being evaluated both in the laboratory and in limited product usage. Some of these promise to bring about significant changes in the way microcircuits arc designed and used. Notes discrete component — дискретный компонент SSI (small-scale integration) — малая интегральная схема MSI (medium-scale integration) — средняя интегральная схема LSI (large-scale integration) — большая интегральная схема LASERS AND MASERS A laser is a machine for making and concentrating light waves into a very intense beam. The letters LASER stand for Light Amplification by Stimulated Emission of Radiation. The light made by a laser is much more intense than ordinary light. With ordinary light, all the light waves are different lengths. With lasers, all the light waves have the same length, and this increases the intensity. Atoms are made up of neutrons, electrons and protons. The electrons circle round the protons and neutrons. In a laser, the electrons arc "excited" to a high energy level. As the electrons fall back from their “excited” state to their normal state, they give off energy. This energy is given off as light which can be seen. A number of materials have this property including some gases, liquids, solids and semiconductors. Thus a number of different types of lasers have been developed. Lasers are now used for many scientific, medical and industrial purposes. The thin beam of light gives a lot of heat and it is used to join metal when a very small joint is needed. The beam can also be used us i drill, to make holes in steel, or even in diamonds. Because the beam is so small, it's very important in delicate surgery and is used in eye operations. Lasers are also used in holography. A hologram is a three-dimensional image, a bit like a photograph. It's different from a photograph because it looks solid. As you walk round a hologram, it changes, as if it were real. Now holography is used for testing engineering ideas. An engineer can use a hologram to build up and check a new building such as a bridge. He can find out all about it before he builds it. The word MASER is also an acronym - for Microwave Amplification by Stimulated Emission of Radiation. The maser is operated on the same principle2 as the laser except that the wavelengths generated are much longer and therefore the energy jumps involved are smaller. The excited bodies in a maser are molecules rather than atomic electrons and the beam generated is a coherent beam of microwaves which is not visible to the eye. Masers have made revolutionary advance possible in a number of different fields. They are up to 1.000 times more sensitive than any other type of amplifiers. Maser amplifiers mounted on radio telescopes can increase even their great range by a factor of 10, allowing us to reach out to the bounds of the known universe. Because of the very constant frequency with which masers can be made to oscillate they can be used as master controls for atomic clocks of unbelievable accuracy: an error not exceeding 1 second in 10.000 years has already been achieved. The idea of using stimulated emission of radiation for amplification of very short waves came from A. Prokhorov and N. Basov of the Lebedev Institute in Moscow. Notes 1. a bit like — немного напоминающий 2. is operated on the same principle — работает на том же принципе 3.1.000 times more sensitive — в 1000 раз более чувствительный REFERENCESBritannica Illustrated Science Library. Encyclopedia Britannica, Inc., 2012. – 101 p. Evans, V. Career paths: Electronics / Virginia Evans, Jenny Dooley, Carl Taylor. – Express Publishing, 2012. – 39 p. Glendenning, E.H. Oxford English for Electronics / Eric H. Glendenning, John McEwan. – Oxford University Press, 208 p. Sopranzi, S. Flash on English for Mechanics, Electronics and Technical Assistance / Sabrina Sopranzi. –Eli S.r.1, 2012. – 47 p. Электронная энциклопедия Британника. [Электронный ресурс]. –Режим доступа: http://global.britannica.com/technology/radio-technology. – Заглавия с экрана. English for Radio Engineering Сборник текстов и упражнений для студентов радиотехнического факультета Составители КИРИЛОВСКАЯ Елена Габдульнуровна ЛЕЖНИНА Татьяна Михайловна Подписано в печать 05.05.2006. Формат 60x84 1/16. Бумага газетная. Печать офсетная. Усл. п. л. 3,7 Уч.-изд. л. 2,9 Тираж 200 экз. Заказ № 3299. C-177 Поволжский государственный технологический университет 424000 Йошкар-Ола, пл. Ленина,3 Редакционно-издательский центр Поволжского государственного технологического университета 424006 Йошкар-Ола, ул. Панфилова, 17 |